Choosing a battery for time-of-use electricity rates starts with your hourly energy pattern, not your home’s total daily consumption. This guide shows how to separate daytime solar production, evening usage, peak-rate demand, backup reserve, and battery losses so you can estimate the solar battery capacity and power output that fit your goals.
Overview
Time-of-use (TOU) rates charge different prices during different parts of the day. A solar battery can store excess solar energy when your panels are producing and discharge it later, potentially reducing the electricity you buy during expensive periods. The right battery size depends on how much energy you need to shift, when you need it, and how much backup capacity you want to keep available.
The most useful starting point is not “How many kilowatt-hours does my home use per day?” Instead, ask:
- How many kilowatt-hours do I use during the utility’s peak-rate window?
- How much of that demand can solar serve directly?
- How much excess solar is available to charge the battery?
- How much energy should remain for an outage?
- Can the battery inverter deliver the power required by my appliances?
A battery that stores enough energy for a rate-shifting goal may not run an entire home during an outage. Conversely, a whole-house battery backup may be larger than necessary if your main objective is avoiding a short, expensive TOU period.
For broader household storage estimates, use this solar battery size calculator guide. For battery aging and replacement planning, see the solar battery replacement guide.
How to estimate
1. Identify the target time window
Check your electricity bill or utility tariff for the exact peak-rate hours and the days they apply. Some plans use different schedules on weekdays, weekends, or seasons. Record the start and end time rather than relying on a general label such as “evening peak.”
2. Measure energy used during that window
Use hourly or 15-minute data from your utility portal, energy monitor, or inverter app if available. Add the kilowatt-hours (kWh) used during the target window. If you only have a daily bill, estimate the portion used during peak hours and label it as an assumption; a full-day total cannot show when the energy was consumed.
3. Subtract energy served directly by solar
Solar panels may cover some daytime loads before the peak period begins. For example, if your home uses 6 kWh during peak hours and solar directly supplies 1 kWh during that period, the battery-related target is closer to 5 kWh. Do not count solar energy twice: energy used immediately by appliances does not also charge the battery.
4. Add a backup reserve
Decide whether the battery is primarily for bill management, outage protection, or both. A reserve can be expressed in kWh or as a percentage of usable capacity. If you want 3 kWh kept for essential loads, add that amount to the energy needed for rate shifting. Some systems manage this reserve through an app or installer setting, while others use a fixed operating limit.
5. Account for losses and battery capacity limits
Charging and discharging are not perfectly efficient. If your target is the energy delivered to your home, divide it by the battery’s round-trip efficiency assumption. Also confirm whether the manufacturer’s listed capacity is usable or nameplate capacity. If the specification already states usable capacity, do not apply a second depth-of-discharge deduction to that figure.
A practical formula is:
Required usable battery energy = (peak-window load − direct solar during that window + backup reserve) ÷ round-trip efficiency
If your calculation produces 8 kWh and the selected battery has 10 kWh of usable capacity, it may meet the energy target under the stated conditions. Actual results vary with weather, operating settings, temperature, battery age, and the amount of solar available to recharge it.
6. Check power output separately
Energy capacity is measured in kWh; power output is measured in kilowatts (kW). A battery can have sufficient stored energy but still fail to run several high-power appliances at once if its inverter output is too low. List the appliances you expect to operate together, including pumps, air-conditioning equipment, induction cooking, electric water heating, and an EV charger. Check both continuous output and surge or starting capability.
Inputs and assumptions
Use this worksheet before comparing solar battery quotes:
| Input | What to record | Why it matters |
|---|---|---|
| Peak-rate schedule | Start, end, and applicable days | Defines the energy-shifting window |
| Peak-window consumption | kWh used during that period | Sets the basic storage target |
| Direct solar contribution | kWh used from solar without battery storage | Avoids oversizing the battery |
| Backup reserve | kWh or percentage | Protects selected loads during outages |
| Usable battery capacity | Manufacturer-listed usable kWh | Shows energy available for normal operation |
| Round-trip efficiency | Manufacturer specification or planning assumption | Accounts for charging and discharging losses |
| Power output | Continuous and surge kW | Determines which loads can run together |
For a conservative estimate, use a representative high-use day rather than an unusually low-use day. Then test a second scenario for winter or poor-weather conditions, when solar production may not fully recharge the battery. If the battery will be paired with a new solar array, compare its size with expected panel production and inverter limits. This home solar system sizing guide can help with the panel side of the calculation.
Battery chemistry and system design also matter. Many residential products use lithium-based batteries, including LiFePO4 designs, but product specifications differ. Confirm usable capacity, temperature limits, warranty conditions, emergency reserve controls, and compatibility with the solar inverter. The inverter and charge controller compatibility guide provides a useful pre-install checklist.
Worked examples
Example 1: TOU bill reduction only
Assume a home uses 7 kWh during the expensive window. Solar directly supplies 2 kWh during those hours, leaving 5 kWh for storage to cover. The homeowner does not want an outage reserve, and the planning assumption for round-trip efficiency is 90%.
5 kWh ÷ 0.90 = approximately 5.6 kWh of usable battery energy needed.
A battery with around 6 kWh of usable capacity could be a reasonable starting point for this simplified objective, subject to the battery’s power rating and the amount of excess solar available for charging. A larger battery might not provide additional TOU value every day if the panels cannot recharge it or if the peak load is lower than expected.
Example 2: TOU shifting plus essential backup
Now assume the same 5 kWh of rate-shifting need, but the homeowner wants to preserve 4 kWh for a refrigerator, internet equipment, lights, and selected outlets during an outage. Using the same 90% planning assumption:
(5 kWh + 4 kWh) ÷ 0.90 = 10 kWh of usable battery energy needed.
This result describes an energy target, not a promise of whole-house backup. If the essential loads require 3 kW at the same time but the battery inverter can supply only 2 kW continuously, the system will need load management or a different configuration. For a comparison between batteries and other backup options, see solar battery versus generator for home backup.
Capacity and power comparison
| Usable capacity | Typical planning role | Power question |
|---|---|---|
| About 5–6 kWh | Small TOU-shifting target or selected essential loads | Can it start and run the intended appliances? |
| About 8–10 kWh | Moderate evening load plus a defined backup reserve | Does inverter output match simultaneous demand? |
| More than 10 kWh | Larger evening loads, longer backup goals, or future electrification | Can solar recharge it and can the system manage peak loads? |
These ranges are planning examples, not product recommendations or guarantees. Actual coverage depends on the load profile, battery settings, solar production, and system architecture.
When to recalculate
Revisit your solar battery sizing whenever a key input changes. Check the calculation after your utility changes TOU periods, peak prices, seasonal schedules, export rules, or net-metering terms. A tariff change can alter the value of charging and discharging even when your household usage stays the same.
Recalculate after adding an EV, heat pump, electric water heater, pool equipment, workshop tools, or other substantial loads. Also review the estimate if household routines change, such as working from home, shifting laundry to the evening, or moving from gas to electric cooking.
At least annually, compare your original assumptions with actual hourly consumption, solar production, battery state-of-charge data, and backup performance. Battery capacity can decline over time, so use current usable-capacity information rather than the original nameplate figure when assessing future coverage. If your system reports warnings or unusual capacity loss, consult the replacement-planning guidance before expanding the system.
Before requesting quotes, bring an updated worksheet, your utility tariff, recent interval data, a list of backup loads, and the required power output. Ask each installer to show usable capacity, continuous and surge power, reserve settings, expected operating limits, and how the system will respond to the applicable TOU schedule. A repeatable calculation will not replace a site-specific design, but it will make battery proposals easier to compare and less likely to be based on a single generic daily-use number.