Comparing solar installation quotes is easier when every proposal is reduced to the same assumptions. This checklist shows how to compare system size, expected production, equipment, labor, batteries, financing, warranties, and exclusions, then use a simple worksheet to identify the real project cost and the questions that still need answers.
Overview
A solar quote is more than a panel price. It is a proposal for an entire solar power system, including design, roof work, electrical equipment, permits, utility coordination, monitoring, labor, and long-term support. Two proposals with similar totals may deliver different amounts of energy, use different equipment, or leave important work outside the contract.
The most reliable way to compare solar quotes is to place them in a side-by-side worksheet. Do not compare only the number of solar panels or the advertised monthly payment. Instead, compare the system’s expected annual production, the equipment models, the cash price before and after applicable incentives, the financing terms, and every stated exclusion.
Use the following principle: compare like with like first, then investigate meaningful differences. A larger system is not automatically better if the roof layout, electricity use, or utility rules do not support it. Likewise, a lower quote may omit battery integration, roof repairs, permit fees, or future electrical work that another installer has included.
Solar installation quote checklist
- System design: proposed solar array size, panel count, panel wattage, roof sections, tilt, orientation, and shading assumptions.
- Production: estimated annual kilowatt-hours, first-year output, degradation assumption, and software or method used for the estimate.
- Equipment: panel manufacturer and model, solar inverter type and model, racking, monitoring hardware, and rapid-shutdown or other required safety equipment.
- Battery scope: usable capacity, power rating, backup circuits, operating mode, installation location, and whether batteries can be added later.
- Project work: labor, design, permits, inspections, utility interconnection, trenching, main-panel upgrades, roof repairs, and removal of old equipment.
- Commercial terms: cash price, deposit, financing rate, loan term, fees, prepayment terms, cancellation rights, and incentive assumptions.
- Protection: equipment warranties, workmanship coverage, roof-penetration warranty, service process, monitoring support, and transfer terms if the property is sold.
How to estimate
Begin with a consistent estimate of the system’s cost and expected value. Record the quoted price exactly as presented, but separate it into useful categories.
- Record the gross project cost. Include the complete cash price before incentives. If the quote has add-ons, list each one separately rather than treating them as included.
- Separate included and excluded work. Mark whether permitting, utility applications, roof repairs, electrical upgrades, trenching, sales tax, and removal of existing equipment are included.
- Calculate cost per installed watt. Divide the gross price by the proposed system size in watts. This is only a comparison tool; it does not measure production, equipment quality, or contract value by itself.
- Calculate cost per expected kilowatt-hour. Divide the gross price by the estimated first-year production in kilowatt-hours. Use this cautiously because production estimates and system lifetimes are assumptions, not guarantees.
- Estimate annual bill impact. Compare the system’s expected production with your electricity use, the utility’s compensation for exported energy, fixed charges, and any time-of-use pricing. Avoid assuming every kilowatt-hour offsets a retail-rate purchase.
- Review the financing separately. Record the amount financed, term, interest rate or equivalent cost, origination fees, payment changes, dealer fees if disclosed, and the total of scheduled payments.
A basic worksheet can use these columns:
Installer | System size | Estimated annual production | Gross price | Included work | Exclusions | Equipment models | Battery details | Cash incentives assumed | Financing total | Warranty terms | Questions.
For a battery proposal, add a second comparison: usable kilowatt-hours divided by the battery price, alongside continuous power, peak power, warranty conditions, and the loads the system is designed to support. A battery’s capacity alone does not tell you whether it can run heating equipment, pumps, refrigeration, or other high-demand loads.
Inputs and assumptions
Ask each installer to identify the inputs behind the proposal. A credible comparison depends on consistent assumptions, not just polished diagrams.
Energy use and production
Provide recent utility bills when possible and explain expected changes, such as an electric vehicle, heat pump, home addition, or planned electrification. Check whether the proposal uses annual consumption or a monthly average. Ask how shading, roof orientation, snow or soiling, inverter losses, and panel degradation are reflected. If one installer estimates substantially more production from a similar array, request the reason in writing.
Equipment and design
Record exact model numbers instead of accepting descriptions such as “premium panel” or “high-efficiency inverter.” Confirm whether the system uses string inverters, power optimizers, or microinverters, and ask how a failure affects the rest of the array. Check compatibility between panels, inverters, batteries, backup equipment, and any existing electrical system. The solar inverter and charge controller compatibility guide can help with equipment questions, especially for systems that include additional solar accessories or storage.
Roof and electrical assumptions
Identify the roof age, roof material, structural concerns, attic access, conduit route, service-panel capacity, and distance between equipment. Ask whether the quote includes a main-panel upgrade, structural reinforcement, tree trimming, roof replacement, or temporary removal and reinstallation. A roof inspection should be treated as a separate decision from the panel comparison; use the roof readiness checklist before signing a design that depends on an uncertain roof condition.
Incentives, utility rules, and ownership
List every incentive assumed in the proposal, then verify eligibility and timing with the relevant tax professional, utility, or public authority. Incentive rules, net-metering arrangements, interconnection requirements, and program availability can change. Do not treat an installer’s estimate as a guarantee of eligibility. Also clarify whether the system is purchased, financed, leased, or covered by a power-purchase agreement, because ownership affects maintenance, incentives, transfers, and future sale of the property.
Worked examples
Consider two illustrative proposals for the same home. These figures are examples for demonstrating the method, not market pricing or a recommendation.
- Proposal A: 7,200 watts, estimated first-year production of 9,000 kilowatt-hours, gross price of $21,600, no battery, permitting and utility coordination included.
- Proposal B: 7,200 watts, estimated first-year production of 8,300 kilowatt-hours, gross price of $20,900, but a main-panel upgrade is excluded and the monitoring service is unclear.
Proposal A has an illustrative gross cost of $3.00 per installed watt. Proposal B is about $2.90 per installed watt. That narrow difference does not make Proposal B the better value: its lower production estimate and excluded electrical work may change the final cost. Before choosing, ask for the panel and inverter models, the expected price of the panel upgrade, the production-model assumptions, and the monitoring terms.
Now add storage to Proposal A. Suppose the battery line item lists 10 kilowatt-hours of usable capacity and 5 kilowatts of continuous output. The comparison should state whether the battery backs up the whole house or only selected circuits, whether solar can recharge it during an outage, and what happens when the battery reaches its reserve setting. A battery added for backup is not evaluated the same way as a battery added to reduce time-of-use electricity purchases. For rate-based planning, see the solar battery sizing guide for time-of-use rates.
Finally, compare the cash and financed versions separately. A low advertised payment may depend on a long term, an initial payment, fees, or assumptions about incentives. Write down the total scheduled payments and confirm whether the loan payment can change. If the project includes a solar battery backup, compare its purpose with alternatives using the battery versus generator guide.
When to recalculate
Revisit your worksheet whenever a proposal changes or a major input moves. Recalculate after an installer changes the panel layout, adds a battery or EV charger, revises the expected production, or identifies a roof or electrical upgrade. Also update the comparison when loan terms, utility export rules, permitting requirements, or incentive eligibility are different from the original quote.
Before signing, request a final contract that matches the selected proposal. Confirm the system size, equipment models, expected scope, payment schedule, completion conditions, change-order process, warranties, monitoring access, and responsibility for failed inspections or interconnection delays. Save the proposal, contract, equipment data sheets, permits, and utility correspondence together.
A practical next step is to create three copies of the worksheet: one for the original quotes, one for revised proposals, and one for the signed scope. This makes changes visible instead of relying on memory. Review the worksheet again before installation begins, after commissioning, and whenever you consider expanding the system or replacing a battery. Careful comparison does not guarantee a particular financial outcome, but it can reveal mismatched assumptions before they become contract surprises.